Record players are apparatus used to reproduce sounds from phonograph vinyls which spins with the help of the turntable in a constant speed. A stylus or needle runs along the grooves on the vinyl and the vibrations it picks up is reproduced into sounds. The process of involves converting the vibrations into electric currents then amplified for loudspeakers to output the reproduced sound.
These parts of your apparatus need regular changing because constantly using them will wear them out. It is specially true with record player needles because of the friction created when it runs along vinyl grooves. Here are a few information about them and how to best take care of this and other parts for a quality sound to be produced.
Setting the player up requires you to have an amplifier and a speaker but there are speakers now that has an amplifier built inside them already so you can just use them instead. Position the speakers on the correct side indicated with enough space between them and the wall. If you placed them on a hard surface, sit them on a piece of foam so that the vibrations can be absorbed.
Buying second hand vinyls is better because they are cheaper than brand new ones particularly those found in charity shops, vintage markets and garage sales. Clean your records thoroughly and have the best possible sounding music when playing them. Machines are available who can clean them but they are alternatives that are cheaper.
When the player is not being used, the dust cover should be down to keep it clean. Though when using it, you can either have it down or off depending on your preference. Having it down may make the sound resonate with the cover so the sound quality will be different when it is taken off so try which one you like best.
Platter mats are materials that looks like a sitting between player and vinyl that made usually from felt. It is used to absorb vibrations and to steadily hold the record for improving sound quality. Felt may be the most common because it is included in the player although cork and rubber are better in reducing static and vibrations.
The needle is being housed in the cartridge which is replaceable because of dust and debris could wear down the needle. Playing regularly the records would require annual cartridge replacement to keep its excellent condition. Consider upgrading the cartridge to improve it further instead of regularly replacing it.
Set the tracking force which is the weight of the cartridge on the vinyl and can be changed by turning the counterweight at the other side of the tonearm. There are guidelines available online or together with the product manual about the suggested tracking force. If the weight is too heavy then the music will be dull to listen to and if it is too light then it will be thin.
Make sure there is enough space for you to place your player because they are usually bulky. It is important also to place them somewhere that will produce lesser vibrations. If not then it could make the needle skip and jump when playing.
These parts of your apparatus need regular changing because constantly using them will wear them out. It is specially true with record player needles because of the friction created when it runs along vinyl grooves. Here are a few information about them and how to best take care of this and other parts for a quality sound to be produced.
Setting the player up requires you to have an amplifier and a speaker but there are speakers now that has an amplifier built inside them already so you can just use them instead. Position the speakers on the correct side indicated with enough space between them and the wall. If you placed them on a hard surface, sit them on a piece of foam so that the vibrations can be absorbed.
Buying second hand vinyls is better because they are cheaper than brand new ones particularly those found in charity shops, vintage markets and garage sales. Clean your records thoroughly and have the best possible sounding music when playing them. Machines are available who can clean them but they are alternatives that are cheaper.
When the player is not being used, the dust cover should be down to keep it clean. Though when using it, you can either have it down or off depending on your preference. Having it down may make the sound resonate with the cover so the sound quality will be different when it is taken off so try which one you like best.
Platter mats are materials that looks like a sitting between player and vinyl that made usually from felt. It is used to absorb vibrations and to steadily hold the record for improving sound quality. Felt may be the most common because it is included in the player although cork and rubber are better in reducing static and vibrations.
The needle is being housed in the cartridge which is replaceable because of dust and debris could wear down the needle. Playing regularly the records would require annual cartridge replacement to keep its excellent condition. Consider upgrading the cartridge to improve it further instead of regularly replacing it.
Set the tracking force which is the weight of the cartridge on the vinyl and can be changed by turning the counterweight at the other side of the tonearm. There are guidelines available online or together with the product manual about the suggested tracking force. If the weight is too heavy then the music will be dull to listen to and if it is too light then it will be thin.
Make sure there is enough space for you to place your player because they are usually bulky. It is important also to place them somewhere that will produce lesser vibrations. If not then it could make the needle skip and jump when playing.
About the Author:
Get a summary of the things to keep in mind when picking a supplier of record player needles and more information about a reputable supplier at http://www.needlefinder.net now.