The sun is the most natural heater in our universe. The combustion of gases created by the sun warms the earths surface so that even when it's cold, the heat that radiates from it warms you. In much the same way the gas fired infrared heaters Ohio suppliers sell generate heat with the use of fuel and warms the objects below it, like floors, machinery, tools, and people. The objects that are warmed release heat into the air and make it warmer.
This system is perfect for industrial manufacturers that operate in warehouses that are large, open, and high ceilinged. These warehouses have traditionally been heated with forced air. These heating systems are built into the warehouse ceilings and blow out hot air at the rate of a 747 engine. It usually does an adequate job, but is inefficient and costly. By contrast, infrared heat systems are 50% more efficient.
There are two types of infrared heating. One is low intensity. The other is high intensity. High intensity systems have been around for almost 75 years. They operate with exposed flames and require high mounting. Reflectors are used to direct the source of the heat. Forced air can be a suitable heating solution for small shops that are not vented and don't have many workers.
This works well in an area where there aren't many workers and the area is not vented. Low intensity heating replicates the sun by generating radiant heat. This heater is usually suspended from ceilings by chains and are under the control of a thermostat.
Low intensity heaters have an enclosed flame. In order to produce heat a burner box triggers a mix of air and gas. A fan forces the air and gas mixture through tubing. The tube emits heat energy from the gas onto reflectors, which direct the warmth onto the floor. The objects in the direct line of the reflected heat warm the space to a comfortable level. This kind of heat starts at the ground level instead of the ceiling to create heat in the space.
If your warehouse space uses forced heat, each time someone opens a door the heat goes out. The system must start all over heating the space. With infrared heat, the heated floor acts the same way a reservoir does. It retains extra heat and will continue to heat the space until the heat lost by the open door is marginalized. This is a real benefit for industrial and commercial businesses that have loading docks in regular use.
There are many benefits from this type of heating, not the least of which is the cost savings. This type of heater is up to fifty percent more cost effective than the forced air variety. They are cleaner and quieter and don't blow dust and debris around like the ones that rely on blowers. These heaters have zoned capabilities that can function as a unit or independently.
Like all heating systems safety precautions must be taken when they are use. Objects that have lower temperature ratings have to be kept at a safe distance. Gas and electrical lines, lighting, and parked cars have to be shielded.
This system is perfect for industrial manufacturers that operate in warehouses that are large, open, and high ceilinged. These warehouses have traditionally been heated with forced air. These heating systems are built into the warehouse ceilings and blow out hot air at the rate of a 747 engine. It usually does an adequate job, but is inefficient and costly. By contrast, infrared heat systems are 50% more efficient.
There are two types of infrared heating. One is low intensity. The other is high intensity. High intensity systems have been around for almost 75 years. They operate with exposed flames and require high mounting. Reflectors are used to direct the source of the heat. Forced air can be a suitable heating solution for small shops that are not vented and don't have many workers.
This works well in an area where there aren't many workers and the area is not vented. Low intensity heating replicates the sun by generating radiant heat. This heater is usually suspended from ceilings by chains and are under the control of a thermostat.
Low intensity heaters have an enclosed flame. In order to produce heat a burner box triggers a mix of air and gas. A fan forces the air and gas mixture through tubing. The tube emits heat energy from the gas onto reflectors, which direct the warmth onto the floor. The objects in the direct line of the reflected heat warm the space to a comfortable level. This kind of heat starts at the ground level instead of the ceiling to create heat in the space.
If your warehouse space uses forced heat, each time someone opens a door the heat goes out. The system must start all over heating the space. With infrared heat, the heated floor acts the same way a reservoir does. It retains extra heat and will continue to heat the space until the heat lost by the open door is marginalized. This is a real benefit for industrial and commercial businesses that have loading docks in regular use.
There are many benefits from this type of heating, not the least of which is the cost savings. This type of heater is up to fifty percent more cost effective than the forced air variety. They are cleaner and quieter and don't blow dust and debris around like the ones that rely on blowers. These heaters have zoned capabilities that can function as a unit or independently.
Like all heating systems safety precautions must be taken when they are use. Objects that have lower temperature ratings have to be kept at a safe distance. Gas and electrical lines, lighting, and parked cars have to be shielded.
About the Author:
For a closer look at the benefits of gas fired infrared heaters Ohio customers should turn to our recommended homepage and read all the information. Find what you need right here at http://www.westernreserveenergy.com/products.
No comments:
Post a Comment